Dissolving Frac ball Dissolved Ball

Model:	MOS Dissolving Frac ball Dissolved Ball
Place of Origin:	Zhejiang,China (Mainland)
Name:	Dissolving Frac ball
Main material:	Aluminium magnesium alloy nano materials
TEMP:	Working in the water under 150℃
Compression strength:	70MPa under the range of 1/4, 1/8
Melting temperature:	According to the temperature of oil-field, higher temperature, the speed of dissolving more faster.
Dissolution medium:	3-5% KCl or NaCl solution
Density:	1.85-1.9g/cm3
Size:	Diameter18-100mm
Tolerances of diameter:	±0.02-0.03mm

Dissolving Frac ball

Main material: Aluminium magnesium alloy nano materials
Working in the water under 150℃.
Compression strength: 70MPa under the range of 1/4, 1/8.
Low density(1.85-1.9g/cm3).
Dissolution medium: 3-5% KCl or NaCl solution.
Melting temperature: According to the temperature of oil-field, higher temperature, the speed of dissolving more faster.
Cracks, scratchs, chips could not be allowed on the ball’s surface.
Size: Diameter18-100mm.
Tolerances of diameter:±0.02-0.03mm
Application	For fracturing horizontal well of a large bridge plug piecewise.
	For fracturing well of open hole packer sliding sleeve.
	For fracturing well of multistage packer.
	For wells of low pressure and easy to cause negative pressure.

Test conditions of Dissolving balls

1. Dissolution medium(Test liquid): 3-5% KCl or NaCl solution.
2. Temperature of test liquid: 70-90℃
3. The total volume of test liquid: 2-3L
4. Time: Replace the dissolution medium(test liquid) every 5 hours later.
5. Before replacement of test liquid, record the changes of the ball’s diameter and weight.
6. After testing continuously about 7 to 15 days, can observe the best effect.

1. Dissolution medium(Test liquid): 3-5% KCl or NaCl solution.

2. Temperature of test liquid: 70-90℃

3. The total volume of test liquid: 2-3L

4. Time: Replace the dissolution medium(test liquid) every 5 hours later.

5. Before replacement of test liquid, record the changes of the ball’s diameter and weight.

6. After testing continuously about 7 to 15 days, can observe the best effect.

Effect

(1)Can be used in the opening of layered fracturing sliding sleeve.

(2)Due to the low density of the ball (1.85 1.9 g/cm3), flowback faster, can return ahead of completely dissolved.

(3)The speed of dissolution related with the working temperature and the structure characteristics.

(4)Can be dissolved in the KCl or NaCl , it is recommended to use 3% KCl or NaCl .

Reviews

There are no reviews yet.

Be the first to review “Dissolving Frac ball Dissolved Ball”

You must be logged in to post a review.